How to upgrade the SSD in Lenovo IdeaPad 730S

This article is about upgrading the solid-state drive of the Lenovo IdeaPad 730S. The hardware of other Lenovo notebooks is similarly disassembled. The upgrade interface of the hard disk needs to be determined according to the specific model. With these two points in mind, you can basically upgrade your hard drive and other components to various notebooks.

Lenovo's IdeaPad 730S features an aluminum alloy design that is slim and lightweight with a 13.3-inch display. It's great for those who don't need a touch screen or convertible version. It comes with an 8th generation Intel Core CPU, up to 16GB of DDR3 memory, and an NVMe PCIe SSD of up to 256GB of M.2 form factor. You can remove the back panel of your laptop and use a new SSD if it fits the M.2 form factor and is compatible with the PCIe NVMe standard.

First, you need to back up the data on the original hard disk. After you have cloned the data from the old hard disk, you can continue with the following steps. Be sure to turn off your notebook before removing the rear panel.

How to replace the IdeaPad 730S hard drive:

1. Use a screwdriver to remove the nine fasteners on the back panel of the laptop.

2. Open the bottom plate with a thumb or hoe tool. Start at the corner and carefully slide along the edges to avoid damaging the panel.

3. Use a Phillips screwdriver to unscrew the solid fastener, a single fastener of the M.2 PCIe NVMe SSD.

4. Pull the old M.2 SSD away from the bracket. It should be relatively easy to extract.

5. Insert the new M.2 SSD into the slot with the plane facing down.

6. Tighten the fasteners at the end of the new M.2 SSD section, taking care not to apply too much force. This ensures that the SSD is in place.

7. Replace the bottom case of the IdeaPad 730S by applying pressure around the edges. When the seat is properly seated, you should hear the panel spring back.

8. Screw on the nine fasteners on the rear panel.

Here you have completed the SSD upgrade of Lenovo laptop, if you clone the old system then your hard disk can start windows and normal use. If not, you will need to install an operating system for the new hard drive.