How to fix laptop is running slow? Solid state & hard disk combination
The computer runs slowly. I hope to
add a dual hard disk to the notebook. Use the "Solid State Drive +
Mechanical Hard Disk" mode to expand the storage space of the computer and
make your laptop run 5 times faster and smoother.
Because in general, there will be two
SATAII/III interfaces in the laptop. These two interfaces are used for the hard
disk and the optical drive respectively. Therefore, if you add a solid state
hard disk, there is no redundant interface. So, we can't take the notebook back
cover apart and add an extra hard drive. Because the optical drive is rarely
used now, if you want to install a dual hard drive, we can discard the drive of
the laptop and transfer the solid state drive or mechanical hard drive to it.
In addition, we also need to see if
the optical drive of our notebook supports the optical drive hard drive and the
optical drive bay needs to be purchased
by yourself.
The 2.5-inch hard drive bays commonly
used in laptops on the market have two thicknesses of hard drives:
One is a 7mm model, which is light and
thin;
One is a 9mm model, and most laptop
hard drives and mobile hard drives are this thickness.
You can measure it yourself before you
buy it.
2. Notebook
dual hard drive installation steps:
1. When upgrading, first remove the
screw that fixes the CD-ROM drive on the back of the laptop, and then pull the
CD-ROM drive out of the CD-ROM drive.
2. Then remove the fixing clip and the
outer casing of the front of the optical drive, and attach the mechanical hard
disk or the fixed hard disk to the fixed frame and the outer casing to the
optical drive bay.
In general, there are a total of four
optical drive buckles for notebooks. When you remove it, be careful to remove
the CD-ROM panel or install it on the original hard disk tray. This
installation ensures that the newly added hard disk will not damage the shape
and structure of the notebook and ensure the integrity of the appearance.
3. Insert the mechanical hard disk or
ssd SSD into the optical drive with the bracket and tighten the fixing screws
on the back of the notebook.
It should be noted that the hard disk tray contains a data read
interface of the hard disk. Therefore, as long as we complete the docking of
the relevant positions of the hard disk drive and the optical drive, the
computer can completely read the contents of the two hard disks completely.
4. After the hard disk is installed,
we will boot the test and enter the BIOS settings of the computer directly
after booting. You can see the contents of both hard drives and be able to
change different boot priorities at the same time.
Through the above operations, we can
successfully complete the laptop dual hard drive modification, you can install
an SSD and a mechanical hard drive. It will greatly improve the performance of
the notebook, not only increase the storage space but also improve the
operating efficiency and speed of the computer.
评论
发表评论