What should I do with the white screen of the Laptop?
The reason for the white screen of the
computer and the general solution.
What is the white screen of the
computer? The white screen of the computer is the fault of the white screen
(white screen) after the LCD screen is turned on. This is the fault phenomenon
of the white screen of the boot screen. Generally, the white screen phenomenon
of the monitor is relatively uncommon. Appeared on some monitors that have been
used for a long time.
The phenomenon of white screen is
generally that the computer monitor has no image, and it is full-screen white.
The main reasons are as follows:
1. The
internal problems of the display mainly include: LCD panel drive circuit problems,
LCD panel power supply circuit problems, poor screen line contact, motherboard
control circuit problems and other issues.
2. The white
screen of the display may also be poor or damaged contact of the graphics card
or screen cable
White screen problem: The white screen
of the LCD screen indicates that the backlight system is working properly and
the imaging system is not working properly. The problem area may be destroyed
by the LVDS chip, screen line or screen imaging system itself on the
motherboard.
2.1 After the screen frame is removed,
the power supply of the screen and the voltage of each signal line are normal
on the screen cable jack under the power-on state. If not, check the relevant
line.
2.2 If the power supply of the screen
and the voltage of each signal line are normal, and the LCD screen is still
white, this is generally caused by the destruction of the imaging system
itself. You can use a normal screen to replace the original screen for further
judgment. (The damage of the general screen imaging system itself is caused by
the soldering or destruction of the LCD control chip.)
3. Release Power
charge
Disconnect the host from the 220V
mains (Note: the notebook needs to remove the battery at the same time), then
press the main switch 3 times for 5 seconds each time. After the operation is
completed, connect the mains and power cable to restart the test. Is the fault
excluded?
Reminder: If the host has the
possibility of entering the liquid, please do not operate to release the
residual charge. The battery should be removed and sent to the service station
for inspection.
4. Adjust the
notebook screen angle
In the power-on state, adjust the
display angle of the screen to see if the fault has changed or returned to
normal? If it is possible, it can be used temporarily, waiting for the idle
time period to contact the service station for further detection of the
possibility of improper screen wiring.
For more information on the laptop
screen white crash solution, refer to the GEMWON repair parts offering solution
for Laptop Screen White. More notebook repair
parts, laptop screens, screen cable,
etc., can be purchased online at wholesale prices.
评论
发表评论